ADM1041 Datasheet | Analog Devices

FEATURES Digital calibration via internal EEPROM Supports SSI specification prehensive fault detection Reduced ponent count on secondary side Standalone or microcontroller control INTERFACE AND INTERNAL FEATURES SMBus interface (I2C patible) Low-drift precision 2.5 V reference Voltage error amplifier Differential current sense Sense resistor or current transformer option Overvoltage protection Undervoltage protection Overcurrent protection Overtemperature protection Start-up undervoltage blanking Programmable digital debounce and delays 352-byte EEPROM available for field data 160-byte EEPROM for calibration Ground continuity monitoring SECONDARY-SIDE FEATURES Generates error signal for primary-side PWM Output voltage adjustment and margining Current sharing Current limit adjustment Or FET control Programmable soft-start slew rate Standalone or microcontroller operation Differential load voltage sense AC mains undervoltage detection (ac sense) Overvoltage protection APPLICATIONS Network servers Web servers Power supply control Or FET VOUT RLOAD GND VDD VDD BIAS PWM CONTROLLER VDD VDD THERMISTOR FG CBD CS- /VLS FD SHRO CS+ SHRS VDD VS + VCMP VS- ICT PULSE AC_OK MON2 DC_OK PSON PEN ADD0 CCMP SCMP SCL SDA GND SHARE BUS VOUT VS + VS- OTP VDD MICROCONTROLLER OPTIONAL ISOLATION BARRIER Figure 1. Typical Application Circuit Rev. A Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 .analog. Fax: 781.326.8703 © 2004 Analog Devices, Inc....