Datasheet4U Logo Datasheet4U.com

ADM1170 - Hot Swap Controller

General Description

The ADM1170 is a hot swap controller that safely enables a printed circuit board to be removed and inserted to a live backplane.

This is achieved using an external N-channel power MOSFET with a current control loop that monitors the load current through a sense resistor.

Key Features

  • Controls supply rails from 1.6 V to 16.5 V Supply voltage range from 2.7 V to 16.5 V Allows protected board removal and insertion to a live backplane External sense resistor provides adjustable analog current limit with circuit breaker Soft start controls inrush current profile Peak fault current limited with fast response Charge pumped gate drive for external N-FET switch Automatic retry or latch-off during current fault Undervoltage lockout 8-lead, TSOT package.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ADM10-D05 AC / DC CONVERTER REICU
ADM10-D05-05 AC / DC CONVERTER REICU
ADM10-D05-12 AC / DC CONVERTER REICU
ADM10-D05-24 AC / DC CONVERTER REICU
ADM10-D12 AC / DC CONVERTER REICU

Other Datasheets by Analog Devices

Part Number Description
ADM1171 Hot Swap Controller
ADM1172 Hot Swap Controller
ADM1173 2.7V to 16.5V Hot Swap Controller
ADM1175 Hot Swap Controller and Digital Power Monitor
ADM1176 Hot Swap Controller and I2C Power Monitor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Data Sheet 1.6 V to 16.5 V Hot Swap Controller with Soft Start ADM1170 FEATURES Controls supply rails from 1.6 V to 16.5 V Supply voltage range from 2.7 V to 16.