Datasheet4U Logo Datasheet4U.com

ADM2582E - Signal and Power Isolated RS-485 Transceiver

General Description

The ADM2582E/ADM2587E are fully integrated signal and power isolated data transceivers with ±15 kV ESD protection and are suitable for high speed communication on multipoint transmission lines.

Key Features

  • Isolated RS-485/RS-422 transceiver, configurable as half or full duplex isoPower integrated isolated dc-to-dc converter ±15 kV ESD protection on RS-485 input/output pins Complies with ANSI/TIA/EIA-485-A-98 and ISO 8482:1987(E) ADM2582E data rate: 16 Mbps ADM2587E data rate: 500 kbps 5 V or 3.3 V operation Connect up to 256 nodes on one bus Open- and short-circuit, fail-safe receiver inputs High common-mode transient immunity: >25 kV/µs Thermal shutdown protection Safety and regulatory approvals.

📥 Download Datasheet

Other Datasheets by Analog Devices

Part Number Description
ADM2587E Signal and Power Isolated RS-485 Transceiver
ADM202 CMOS RS-232 Driver/Receiver
ADM202E RS-232 Line Drivers/Receivers
ADM203 CMOS RS-232 Driver/Receivers
ADM205 0.1 uF/ +5 V Powered CMOS RS-232 Drivers/Receivers
ADM206 5V Powered CMOS RS-232 Drivers/Receivers
ADM206E RS-232 Line Drivers/Receivers
ADM207 5V Powered CMOS RS-232 Drivers/Receivers
ADM207E RS-232 Line Drivers/Receivers
ADM208 5V Powered CMOS RS-232 Drivers/Receivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Data Sheet Signal and Power Isolated RS-485 Transceiver with ±15 kV ESD Protection ADM2582E/ADM2587E FEATURES Isolated RS-485/RS-422 transceiver, configurable as half or full duplex isoPower integrated isolated dc-to-dc converter ±15 kV ESD protection on RS-485 input/output pins Complies with ANSI/TIA/EIA-485-A-98 and ISO 8482:1987(E) ADM2582E data rate: 16 Mbps ADM2587E data rate: 500 kbps 5 V or 3.