Datasheet4U Logo Datasheet4U.com

ADN2880 - Transimpedance Amplifier

Datasheet Summary

Description

The ADN2880 is a 3.3 V, high gain SiGe transimpedance amplifier (TIA).

The TIA converts the small signal current of a photo detector into differential voltage output.

Features

  • Bandwidth: 2.5 GHz Optical sensitivity:.
  • 24.2 dBm 1 Differential transimpedance: 4400 V/A Power dissipation: 70 mW Differential output swing: 260 mV p-p Input overload current: 4.3 mA p-p On-chip RSSI function Low frequency cutoff: 20 kHz On-chip PD filter: RF = 200 Ω, CF = 20 pF Die size: 0.7 mm × 1.2 mm.

📥 Download Datasheet

Datasheet preview – ADN2880

Datasheet Details

Part number ADN2880
Manufacturer Analog Devices
File Size 309.29 KB
Description Transimpedance Amplifier
Datasheet download datasheet ADN2880 Datasheet
Additional preview pages of the ADN2880 datasheet.

📁 Similar Datasheet

Other Datasheets by Analog Devices
  • ADN2882 - Low Noise Transimpedance Amplifier
  • ADN2804 - Clock and Data Recovery
  • ADN2805 - 1.25 Gbps Clock and Data Recovery IC
  • ADN2806 - Clock and Data Recovery IC
  • ADN2807 - Clock and Data Recovery
  • ADN2809 - Multi-Rate to 2.7Gbps Clock and Data Recovery IC with Limiting Amplifier
  • ADN2811 - OC-48/OC-48 FEC Clock and Data Recovery IC
  • ADN2812 - Continuous Rate 12.3 Mb/s to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com 3.2 Gbps, 3.3 V, Low Noise, Transimpedance Amplifier ADN2880 FEATURES Bandwidth: 2.5 GHz Optical sensitivity: −24.2 dBm 1 Differential transimpedance: 4400 V/A Power dissipation: 70 mW Differential output swing: 260 mV p-p Input overload current: 4.3 mA p-p On-chip RSSI function Low frequency cutoff: 20 kHz On-chip PD filter: RF = 200 Ω, CF = 20 pF Die size: 0.7 mm × 1.2 mm GENERAL DESCRIPTION The ADN2880 is a 3.3 V, high gain SiGe transimpedance amplifier (TIA). The TIA converts the small signal current of a photo detector into differential voltage output. The ADN2880 features a 315 nA typical input-referred noise, enabling an optical sensitivity of −24.2 dBm (0.85 A/W PIN). With a bandwidth of 2.5 GHz, the ADN2880 allows a data rate operation up to 3.2 Gbps.
Published: |