• Part: ADN4693E-1
  • Description: High Speed M-LVDS Transceiver
  • Manufacturer: Analog Devices
  • Size: 943.79 KB
ADN4693E-1 Datasheet (PDF) Download
Analog Devices
ADN4693E-1

Description

The ADN4693E-1 is a multipoint, low voltage differential signaling (M-LVDS) transceiver (driver and receiver pair) that can operate at up to 200 Mbps (100 MHz) nonreturn to zero (NRZ). The receiver detects the bus state with a differential input of as little as ±50 mV over the common-mode voltage range of the device.

Key Features

  • Full-duplex M-LVDS transceiver (driver and receiver pair)
  • Switching rate: 200 Mbps (100 MHz)
  • Type 1 receiver with input hysteresis of 25 mV
  • Compatible with the TIA/EIA-899 standard for M-LVDS
  • Glitch free power-up/power-down on M-LVDS bus
  • Controlled transition times on driver output
  • Common-mode range: -1 V to +3.4 V, allowing communication with 2 V of ground noise
  • Driver outputs high-Z when disabled or powered off
  • Enhanced ESD protection on bus pins
  • ≥±15 kV HBM, air discharge