Datasheet4U Logo Datasheet4U.com

ADP1190 - Integrated 500 mA Load Switch

Datasheet Summary

Description

The ADP1190 is an integrated high-side load switch with four signal switches, designed for operation from 1.4 V to 3.6 V.

This load switch provides power domain isolation for extended power battery life.

Features

  • Low input voltage range: 1.4 V to 3.6 V Power switch: low RDSON of 60 mΩ at 3.6 V, with active discharge 4 normally open SPST signal switches: RDSON of 2 Ω at 1.8 V with active pull-down on one side 500 mA continuous operating current Built-in level shift for control logic that can be operated by 1.2 V logic Ultralow shutdown current:.

📥 Download Datasheet

Datasheet preview – ADP1190

Datasheet Details

Part number ADP1190
Manufacturer Analog Devices
File Size 448.08 KB
Description Integrated 500 mA Load Switch
Datasheet download datasheet ADP1190 Datasheet
Additional preview pages of the ADP1190 datasheet.

📁 Similar Datasheet

  • ADP1191 - PRECISION SEMICONDUCTOR PRESSURE SENSOR (ETC)
  • ADP1101 - PRECISION SEMICONDUCTOR PRESSURE SENSOR (ETC)
  • ADP1111 - PRECISION SEMICONDUCTOR PRESSURE SENSOR (ETC)
  • ADP1121 - PRECISION SEMICONDUCTOR PRESSURE SENSOR (ETC)
  • ADP1131 - PRECISION SEMICONDUCTOR PRESSURE SENSOR (ETC)
  • ADP1132 - PRECISION SEMICONDUCTOR PRESSURE SENSOR (ETC)
  • ADP1141 - PRECISION SEMICONDUCTOR PRESSURE SENSOR (ETC)
  • ADP1151 - PRECISION SEMICONDUCTOR PRESSURE SENSOR (ETC)
  • ADP1161 - PRECISION SEMICONDUCTOR PRESSURE SENSOR (ETC)
  • ADP1171 - PRECISION SEMICONDUCTOR PRESSURE SENSOR (ETC)
Other Datasheets by Analog Devices
  • ADP1190A - Integrated 500 mA Load Switch
  • ADP1196 - High-Side or Low-Side Load Switch
  • ADP1108 - DC-to-DC Converter
  • ADP1109 - DC-to-DC Converter
  • ADP1109A - DC-to-DC Converter
  • ADP1110 - Step-Up/Step-Down Switching Regulator
  • ADP1111 - Step-Up/Step-Down SW Regulator
  • ADP1147 - Step-Down Switching Regulator Controllers

Full PDF Text Transcription

Click to expand full text
Data Sheet FEATURES Low input voltage range: 1.4 V to 3.6 V Power switch: low RDSON of 60 mΩ at 3.6 V, with active discharge 4 normally open SPST signal switches: RDSON of 2 Ω at 1.8 V with active pull-down on one side 500 mA continuous operating current Built-in level shift for control logic that can be operated by 1.2 V logic Ultralow shutdown current: <0.7 μA Ultrasmall 1.2 mm × 1.6 mm × 0.5 mm, 12-ball, 0.4 mm pitch WLCSP Integrated 500 mA Load Switch with Quad Signal Switch ADP1190 FUNCTIONAL BLOCK DIAGRAM P S1 N T1 P S2 N T2 P S3 N T3 APPLICATIONS Mobile phones SIM card disconnect switches Digital cameras and audio devices Portable and battery-powered equipment P S4 N T4 OFF EN ON 5ms DEBOUNCE 4MΩ GND IN LOAD SWITCH http://www.DataSheet4U.com/ OUT 11259-001 Figure 1.
Published: |