ADP2119 Datasheet | Analog Devices

FEATURES Continuous output current ADP2119: 2 A ADP2120: 1.25 A 145 mΩ and 70 mΩ integrated MOSFETs Input voltage range from 2.3 V to 5.5 V Output voltage from 0.6 V to VIN ±1.5% output accuracy 1.2 MHz fixed switching frequency Synchronizable between 1 MHz and 2 MHz Selectable PWM or PFM mode operation Current mode architecture Precision threshold enable input Power-good flag Voltage tracking Integrated soft start Internal pensation Startup with precharged output UVLO, OVP, OCP, and thermal shutdown 10-lead, 3 mm × 3 mm LFCSP_WD package Supported by ADIsim Power™ design tool APPLICATIONS Point of load conversion munications and networking equipment Industrial and instrumentation Consumer electronics Medical applications GENERAL DESCRIPTION The ADP2119/ADP2120 are low quiescent current, synchronous, step-down dc-to-dc regulators in a pact 3 mm × 3 mm LFCSP_WD package. Both devices use a current mode, constant frequency pulse-width modulation (PWM) control scheme for excellent stability and transient response. Under light load conditions, they can be configured to operate in a pulse frequency modulation (PFM) mode, which reduces switching frequency to save power. The ADP2119/ADP2120 support input voltages from 2.3 V to 5.5 V. The output voltage can be adjusted from 0.6 V up to the input voltage (VIN) for the adjustable version, whereas the fixed output version is available in preset output voltage options of 3.3 V, 2.5 V, 1.8 V, 1.5 V, 1.2 V, and 1.0 V. The ADP2119/ADP2120 require minimal external parts and provide a high efficiency solution with their integrated power switches, synchronous rectifiers, and internal pensation. Each IC draws less than 2 µA current from the input source when it is disabled. Other key features include undervoltage lockout (UVLO), integrated soft start to limit inrush current at startup, overvoltage protection (OVP), overcurrent protection Rev. A Information furnished by Analog Devices is believed to be accurate and reliable. However, no...