Datasheet4U Logo Datasheet4U.com

ADP3110A - MOSFET Driver

General Description

The ADP3110A is a dual, high voltage MOSFET driver optimized for driving two N-channel MOSFETs, the two switches in a nonisolated synchronous buck power converter.

Each driver is capable of driving a 3000 pF load with a 25 ns propagation delay and a 30 ns transition time.

Key Features

  • All-in-one synchronous buck driver Bootstrapped high-side drive One PWM signal generates both drives Anticross conduction protection circuitry OD for disabling the driver outputs Meets CPU VR requirement when used with Analog Devices Flex-Mode™ 1 controller.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ADP3110A 12V MOSFET Driver ON Semiconductor
ADP3110 12V MOSFET Driver ON Semiconductor
ADP3120A 12V MOSFET Driver ON Semiconductor
ADP3121 12V MOSFET Driver ON Semiconductor
ADP3164 5-Bit Programmable 4-Phase Synchronous Buck Controller ON Semiconductor

Other Datasheets by Analog Devices

Part Number Description
ADP3110 12V MOSFET Driver
ADP3118 Dual Bootstrapped 12 V MOSFET Driver
ADP3120 Dual Bootstrapped 12 V MOSFET Driver
ADP3120A MOSFET Driver
ADP3152 5-Bit Programmable Synchronous Switching Regulator Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Dual Bootstrapped, 12 V MOSFET Driver with Output Disable ADP3110A FEATURES All-in-one synchronous buck driver Bootstrapped high-side drive One PWM signal generates both drives Anticross conduction protection circuitry OD for disabling the driver outputs Meets CPU VR requirement when used with Analog Devices Flex-Mode™ 1 controller GENERAL DESCRIPTION The ADP3110A is a dual, high voltage MOSFET driver optimized for driving two N-channel MOSFETs, the two switches in a nonisolated synchronous buck power converter. Each driver is capable of driving a 3000 pF load with a 25 ns propagation delay and a 30 ns transition time. One of the drivers can be bootstrapped and is designed to handle the high voltage slew rate associated with floating high-side gate drivers.