Datasheet4U Logo Datasheet4U.com

ADPL63164 - Microprocessor Reset

Description

The ADPL63164 low-power microprocessor (μP) supervisory circuits monitor single/dual system supply voltages from 1.575V to 5V and provide maximum adjustability for reset and watchdog functions.

Features

  • immunity to power-supply transients. The ADPL63164 has a ±2% factory-trimmed reset threshold voltage in approximately 100mV increments from 1.575V to 5V and/or adjustable reset threshold voltages using external resistors. The reset and watchdog delays are adjustable with external capacitors. The ADPL63164 contains a watchdog select input that extends the watchdog timeout period by 128x. The ADPL63164 is available with an open-drain active-low RESET output. The ADPL63164 is available in an 8-pin.

📥 Download Datasheet

Datasheet preview – ADPL63164

Datasheet Details

Part number ADPL63164
Manufacturer Analog Devices
File Size 466.92 KB
Description Microprocessor Reset
Datasheet download datasheet ADPL63164 Datasheet
Additional preview pages of the ADPL63164 datasheet.

📁 Similar Datasheet

  • ADP-2-1+ - Power Splitter/Combiner (Mini-Circuits)
  • ADP-2-10 - Power Splitter/Combiner (Mini-Circuits)
  • ADP-2-10+ - Power Splitter/Combiner (Mini-Circuits)
  • ADP-2-1W - Power Splitter/Combiner (Mini-Circuits)
  • ADP-2-4 - Power Splitter/Combiner (Mini-Circuits)
  • ADP-2-9+ - Power Splitter/Combiner (Mini-Circuits)
  • ADP-DFB-1368-SM-TO39 - DISTRIBUTED FEEDBACK LASER DIODE (Andesec)
  • ADP-G2 - 5W Small AC Adaptors (Mitsumi Electronics)
  • ADP-S232 - 4 Voies - Sorties Analogiques (Firelec)
  • ADP0524A - IGBT (MORNSUN)
Other Datasheets by Analog Devices

Full PDF Text Transcription

Click to expand full text
Microprocessor Reset Circuits with Capacitor-Adjustable Reset/Watchdog Timeout Delay ADPL63164 General Description The ADPL63164 low-power microprocessor (μP) supervisory circuits monitor single/dual system supply voltages from 1.575V to 5V and provide maximum adjustability for reset and watchdog functions. These devices assert a reset signal whenever the VCC supply voltage or RESET IN falls below its reset threshold or when manual reset is pulled low. The reset output remains asserted for the reset timeout period after VCC and RESET IN rise above the reset threshold. The reset function features immunity to power-supply transients. The ADPL63164 has a ±2% factory-trimmed reset threshold voltage in approximately 100mV increments from 1.
Published: |