Datasheet4U Logo Datasheet4U.com

ADSST-EM-3041 - Powerful Energy Meter Chipset

Download the ADSST-EM-3041 datasheet PDF. This datasheet also covers the ADSST-EM-3040 variant, as both devices belong to the same powerful energy meter chipset family and are provided as variant models within a single manufacturer datasheet.

General Description

RMS Voltage DataSheet4U.com RMS Current The ADSST-SALEM-3T energy meter chipset consists of an Active Power efficient ADSST-218x digital signal processor (DSP), a fast and Apparent Power accurate 6-channel, 16-bit ADSST-73360LAR sigma-delta anaInductive Reactive Power log-to-digital converter (ADC),

Key Features

  • High accuracy Supports IEC 60687/61036 and ANSI C12.1/12.20 Suitable for class0.5 and class0.2 meter Full four quadrant measurement of parameters SPI® compatible serial interface Pulse output with programmable pulse constant as pulses/kWh or Wh/pulse Programmable duty cycle for pulse output Embedded calibration routines for gain and dc offset Software based phase and nonlinearity compensation for current transformers 15 kHz sampling frequency UART mode enables a PC to directly access all compute.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (ADSST-EM-3040_AnalogDevices.pdf) that lists specifications for multiple related part numbers.

Other Datasheets by Analog Devices

Part Number Description
ADSST-EM-3040 Powerful Energy Meter Chipset
ADSST-EM-3035 3-Phase Electronic Energy Meter
ADSST-EM-2030 3-Phase Electronic Energy Meter Chipset
ADSST-SALEM-3T Powerful Energy Meter Chipset
ADSP-1010A 16 X 16-Bit CMOS Multiplier / Accumulator
ADSP-2100A DSP Microcomputers
ADSP-2101 DSP Microcomputers
ADSP-21020 32/40-Bit IEEE Floating-Point DSP Microprocessor
ADSP-2103 DSP Microcomputers
ADSP-2104 Low Cost DSP Microcomputers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Powerful Energy Meter Chipset ADSST-SALEM-3T FEATURES High accuracy Supports IEC 60687/61036 and ANSI C12.1/12.20 Suitable for class0.5 and class0.2 meter Full four quadrant measurement of parameters SPI® compatible serial interface Pulse output with programmable pulse constant as pulses/kWh or Wh/pulse Programmable duty cycle for pulse output Embedded calibration routines for gain and dc offset Software based phase and nonlinearity compensation for current transformers 15 kHz sampling frequency UART mode enables a PC to directly access all computed parameters Flags to indicate tamper conditions Single 3.0 V supply Developer’s kit to accelerate design process (See Ordering Guide for separate ordering number.