ADUM6000 Datasheet | Analog Devices

FEATURES iso Power integrated, isolated dc-to-dc converter Regulated 5 V or 3.3 V output Up to 400 m W output power 16-lead SOIC wide-body package (RW-16) 16-lead SOIC wide-body package with enhanced creepage (RI-16-2) High temperature operation: 105°C maximum High mon-mode transient immunity: >25 k V/μs Thermal overload protection Safety and regulatory approvals UL recognition 5000 V rms for 1 minute per UL 1577 CSA ponent Acceptance Notice #5A (pending) IEC 60601-1: 250 V rms, 8 mm package (RI-16-2) IEC 60950-1: 400 V rms, 8 mm package (RI-16-2) VDE certificate of conformity (RW-16) (pending) IEC 60747-5-2 (VDE 0884 Part 2):2003-01 VIORM = 846 V peak VDE certificate of conformity (RI-16-2) DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 846 V peak Isolated, 5 k V, DC-to-DC Converter ADu M6000 GENERAL DESCRIPTION The ADu M60001 is an isolated dc-to-dc converter based on the Analog Devices, Inc., i Coupler® technology. The dc-to-dc converter in this device provides regulated, isolated power in several binations of input and output voltages as listed in Table 1. The Analog Devices chip scale transformer i Coupler technology transfers isolated power in this dc-to-dc converter with up to 31% efficiency. The result is a small form factor, total isolation solution. Higher output power levels are obtained by using the ADu M6000 to augment the power output of the ADu M5401, ADu M5402, ADu M5403, ADu M5404, ADu M520x, and ADu M620x i Couplers with iso Power®. iso Power uses high frequency switching elements to transfer power through its transformer. Special care must be taken during printed circuit board (PCB) layout to meet emissions standards. See the AN-0971 Application Note for board layout remendations. Table 1. Power Levels Input Voltage 5V 5V 3.3 V Output Voltage 5V 3.3 V 3.3 V Output Power 400 m W 330 m W 132 m W APPLICATIONS USB peripheral power RS-232/RS-422/RS-485 transceiver power Industrial field bus power Industrial PLCs FUNCTIONAL BLOCK DIAGRAM VDD1 1 GND1 2...