Datasheet4U Logo Datasheet4U.com

DS2431-A1 - 1-Wire EEPROM

General Description

The DS2431-A1 is an AEC-Q100 Grade 1 qualified version of the DS2431.

The logical behavior of both versions is identical.

The DS2431-A1 is a 1024-bit, 1-Wire® EEPROM chip organized as four memory pages of 256 bits each.

Key Features

  • 1024 Bits of EEPROM Memory Partitioned Into Four Pages of 256 Bits.
  • Individual Memory Pages Can Be Permanently Write Protected or Put in EPROM-Emulation Mode (“Write to 0”).
  • Switchpoint Hysteresis and Filtering to Optimize Performance in the Presence of Noise.
  • IEC 1000-4-2 Level 4 ESD Protection (+8kV Contact, +15kV Air, Typ).
  • Reads and Writes Over a 4.5V to 5.25V Voltage Range from -40°C to +125°C.
  • Communicates to Host with a Single Digital Signal at 15.4kbps Usin.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS2431-A1 1-Wire EEPROM Maxim Integrated
DS2431 1-Wire EEPROM Maxim Integrated
DS2430 256-Bit 1-Wire EEPROM Dallas Semiconducotr
DS2430A 256-Bit 1-Wire EEPROM Maxim Integrated
DS2432 1Kb Protected 1-Wire EEPROM Maxim Integrated

Other Datasheets by Analog Devices

Part Number Description
DS2401 Silicon Serial Number
DS2484 Single-Channel 1-Wire Master
DS28E07 1-Wire EEPROM
DS28E17 1-Wire-to-I2C Controller Bridge
DS28E25 DeepCover Secure Authenticator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
1024-Bit, 1-Wire EEPROM for Automotive Applications Design Resources Support Click here to ask an associate for production status of specific part numbers. DS2431-A1 General Description The DS2431-A1 is an AEC-Q100 Grade 1 qualified version of the DS2431. The logical behavior of both versions is identical. The DS2431-A1 is a 1024-bit, 1-Wire® EEPROM chip organized as four memory pages of 256 bits each. Data is written to an 8-byte scratchpad, verified, and then copied to the EEPROM memory. As a special feature, the four memory pages can individually be write protected or put in EPROM-emulation mode, where bits can only be changed from a 1 to a 0 state. The DS2431-A1 communicates over the single-conductor 1-Wire bus. The communication follows the standard 1-Wire protocol.