Datasheet4U Logo Datasheet4U.com

HMC-ALH310 - GaAs HEMT MMIC LOW NOISE AMPLIFIER

General Description

The HMC-ALH310 is a three stage GaAs HEMT MMIC Low Noise Amplifier (LNA) which operates between 37 and 42 GHz.

Key Features

  • Noise Figure: 3.5 dB P1dB: +12 dBm Gain: 22 dB Supply Voltage: +2.5V 50 Ohm Matched Input/Output Die Size: 1.80 x 0.73 x 0.1 mm General.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HMC-ALH313 GaAs HEMT MMIC LOW NOISE AMPLIFIER Hittite Microwave Corporation
HMC-ALH369 GaAs HEMT MMIC LOW NOISE AMPLIFIER Hittite Microwave Corporation
HMC-ALH376 GaAs HEMT MMIC LOW NOISE AMPLIFIER Hittite Microwave Corporation
HMC-ALH382 GaAs HEMT LOW NOISE AMPLIFIER Hittite Microwave Corporation
HMC-ALH102 GaAs HEMT MMIC WIDEBAND LOW NOISE AMPLIFIER Hittite Microwave Corporation

Other Datasheets by Analog Devices

Part Number Description
HMC-ALH311 GaAs HEMT MMIC LOW NOISE DRIVER AMPLIFIER
HMC-ALH313 GaAs HEMT MMIC LOW-NOISE AMPLIFIER
HMC-ALH364 GaAs HEMT MMIC LOW NOISE AMPLIFIER
HMC-ALH369 GaAs HEMT MMIC LOW-NOISE AMPLIFIER
HMC-ALH376 GaAs HEMT MMIC LOW-NOISE AMPLIFIER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LOW NOISE AMPLIFIERS - CHIP v02.0209 1 Typical Applications This HMC-ALH310 is ideal for: • Point-to-Point Radios • Point-to-Multi-Point Radios • Military & Space Functional Diagram HMC-ALH310 GaAs HEMT LOW NOISE AMPLIFIER, 37 - 42 GHz Features Noise Figure: 3.5 dB P1dB: +12 dBm Gain: 22 dB Supply Voltage: +2.5V 50 Ohm Matched Input/Output Die Size: 1.80 x 0.73 x 0.1 mm General Description The HMC-ALH310 is a three stage GaAs HEMT MMIC Low Noise Amplifier (LNA) which operates between 37 and 42 GHz. The HMC-ALH310 features 22 dB of small signal gain, 3.5 dB of noise figure and an output power of +12 dBm at 1dB compression from a +2.5V supply voltage. All bond pads and the die backside are Ti/Au metallized and the amplifier device is fully passivated for reliable operation.