Datasheet4U Logo Datasheet4U.com

HMC270MS8G - GaAs MMIC SPDT SWITCH

General Description

The HMC270MS8G & HMC270MS8GE are broadband non-reflective GaAs SPDT switches in 8 lead MSOP grounded base surface mount plastic packages.

Covering DC to 8 GHz, the switch offers excellent isolation from 70 to 35 dB.

The negative control voltage of -5 volts allows operation down to DC.

Key Features

  • The HMC270MS8G / HMC270MS8GE is ideal for Broadband Performance: DC - 8 GHz DC - 8.0 GHz.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HMC270 Staffa Dual Displacement Hydraulic Motor Kawasaki
HMC271LP4 1 dB LSB GaAs MMIC Hittite Microwave Corporation
HMC271LP4E 1 dB LSB GaAs MMIC Hittite Microwave Corporation
HMC272MS8 GaAs MMIC SMT SINGLE BALANCED MIXER Hittite Microwave Corporation
HMC278MS8G MEDIUM POWER GaAs MMIC Hittite Microwave Corporation

Other Datasheets by Analog Devices

Part Number Description
HMC270MS8GE GaAs MMIC SPDT SWITCH
HMC270AMS8GE GaAs MMIC SPDT SWITCH NON-REFLECTIVE
HMC272AMS8 GaAs MMIC SMT SINGLE BALANCED MIXER
HMC272AMS8E GaAs MMIC SMT SINGLE BALANCED MIXER
HMC273AMS10GE 1 dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HMC270MS8G / 270MS8GE v04.0607 GaAs MMIC SPDT SWITCH NON-REFLECTIVE, DC - 8 GHz SWITCHES - SMT 10 Typical Applications Features The HMC270MS8G / HMC270MS8GE is ideal for Broadband Performance: DC - 8 GHz DC - 8.0 GHz applications: Very High Isolation: 45 dB @ 6 GHz • CATV Non-Reflective Design • MMDS & WirelessLAN • Wireless Local Loop LETE Functional Diagram Low Cost MSOP-8 Package: 14.8 mm2 General Description The HMC270MS8G & HMC270MS8GE are broadband non-reflective GaAs SPDT switches in 8 lead MSOP grounded base surface mount plastic packages. Covering DC to 8 GHz, the switch offers excellent isolation from 70 to 35 dB. The negative control voltage of -5 volts allows operation down to DC. If positive control is required along with high isolation, see the DC to 3.