HMC675LP3E Datasheet | Analog Devices

Features Equivalent Input Bandwidth: 10 GHz Propagation Delay: 100 ps Overdrive & Slew Rate Dispersion: 10 ps Minimum Pulse Width: 60 ps Resistor Programmable Hysteresis Differential Latch Control Power Dissipation: 100 m W RSPECL and RSECL Versions Available 16 Lead 3x3 mm SMT Package: 9 mm2 General Description The HMC675LP3E is a Si Ge monolithic, ultra fast parator that features reduced swing (RS) CML output drivers and latch inputs. The parator supports 10 Gbps operation while providing 100 ps propagation delay and 60 ps minimum pulse width with 0.2 ps rms random jitter (RJ). Overdrive and slew rate dispersion are typically 10 ps, making the device ideal for a wide range of applications from ATE to broadband munications. The reduced swing CML output stage is designed to directly drive 400 m V into 50 ohms terminated to GND. The HMC675LP3E features high speed latch and programmable hysteresis and may be configured to operate in either latch mode, or as a tracking parator. Electrical Specifications, TA = +25 °C, Vcci= +3.3 V, Vcco = 0 V, Vee = -3 V, VTERM = 0 V Parameter Conditions Min. Typ. Max Input Voltage Range -2 Input Differential Voltage -1.75 Input Offset Voltage ±5 Input Offset Voltage, Temperature Coefficient Input Bias Current Input Bias Current Temperature Coefficient Input Offset Current Input Impedance 50 mon Mode Input Impedance Differential Input Impedance Active Gain 43 mon Mode Rejection Ratio Hysteresis Rhys = ∞ ±1 Units V V m V µV / °C u A n A / °C µA Ω KΩ KΩ d B d B m...