HMC866LC3 Datasheet | Analog Devices

HMC866LC3 v01.0614 32 Gbps LIMITING AMPLIFIER  Limiting Amplifiers - SMT Typical Applications The HMC866LC3 is ideal for: - - 100 Gbps Ethernet - - 100 Gbps Long Haul - - 40 Gbps (D)QPSK Receivers - - Broadband Gain Block for Test & Measurement Equipment Features Supports Data Rates up to 43 Gbps. Low Power Dissipation: 280 m W @ Vcc = +3.3V Differential Small Signal Gain: 29 d B Input Sensitivity: 20 m Vp-p Differential 3-d B Bandwidth: 26.5 GHz Adjustable Output Voltage Swing up to 800 m Vp-p Differential 16 Lead 3x3mm SMT package: 9mm2 Functional Diagram General Description The HMC866LC3 is a Limiting Amplifier packaged in a leadless 3x3 mm ceramic surface mount package. The amplifier supports up to 43 Gbps operation and provides 29 d B of differential gain. The output voltage swing is adjustable up to 800 m Vp-p differential by using the VAC analog control input and the additive RMS jitter is less than 300 fs for 32 Gbps operation. The amplifier allows external offset correction function to both inputs and outputs. All input/output RF signals of the HMC866LC3 are terminated with 50 Ohms to +3.3V internally and may be either AC or DC coupled. The outputs of the device can be operated either differentially or singleended. Outputs can be connected directly to 50 Ohm terminated system referenced to 3.3V, while DC blocking capacitors may be used if the terminating system is 50 Ohms to a non 3.3V level. Electrical Specifications, TA = +25° C, Vcc = +3.3V, Vee = 0V, Icc = 85m A Parameter Conditions Min. Typ. Differential Small Signal Gain VAC = 1.6V Data Rate Small Signal Bandwidth 3-d B cutoff Input Return Loss Up to 26.5 GHz Output Return...