Analog Devices LT1016
the LT1016 to be used in precision applications. This allows the LT1016 to remain stable with the outputs in the active region which, greatly reduces the problem of output “glitching” when the input signal is slow moving or is low level. The LT1016 has a LATCH pin which will retain input data at the outputs, when held high.| Part No. | LT1016 |
|---|---|
| Datasheet | LT1016 Download |
| Manufacturer |  Analog Devices |
| Description | UltraFast Precision 10ns Comparator |
| Buy | Stock & Price |
FEATURES
n UltraFast™ (10ns typ) n Operates Off Single 5V Supply or ±5V n Complementary Output to TTL n Low Offset Voltage n No Minimum Input Slew Rate Requirement n No Power Supply Current Spiking n Output Latch CapabilityAPPLICATIONS
n High Speed A/D Converters● High Speed Sampling Circuits
● Line Receivers
● Extended Range V-to-F Converters
● Fast Pulse Height/Width Discriminators
● Zero-Crossing Detectors
● Current Sense for Switching Regulators
● High Speed Triggers
● Crystal Oscillators All registered trademarks and trademarks are the property of their respective owners.
DESCRIPTION
TheLT®1016 isanUltraFast10ns comparator that interfaces directly to TTL/CMOS logic while operating off either ±5V or single 5V supplies. Tight offset voltage specifications and high gain allow the LT1016 to be used in precision applications. Matched complementary outputs further extend the versatility of this comparator. A unique output stage provides active drive in both directions for maximum speed into TTL/CMOS logic or passive loads, yet does not exhibit the large current spikes found in conventional output stages.
