Datasheet4U Logo Datasheet4U.com

LT8418 - 100V Half-Bridge GaN Driver

General Description

The LT8418 is a 100V half-bridge GaN driver that integrates top and bottom driver stages, driver logic control, and protections.

It can be configured into synchronous half-bridge, full-bridge topologies, or buck, boost, and buck-boost topologies.

Key Features

  • Half-Bridge Gate Driver for GaN FETs.
  • 0.6Ω Pull-Up Resistance at Top Gate Driver.
  • 0.2Ω Pull-Down Resistance at Bottom Gate Driver.
  • 4A Peak Source, 8A Peak Sink Current Capability.
  • Smart Integrated Bootstrap Switch.
  • Split-Gate-Driver to Adjust Turn-On/Turn-Off Strength.
  • Default Low-State for All Driver Inputs and Outputs.
  • Maximum 15V Voltage Rating at INT and INB Inputs.
  • Independent INT, INB Inputs with TTL Logic Compatible.
  • Fast Propagation Dela.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LT8410 Ultralow Power Boost Converter Linear Technology Corporation
LT8410-1 Ultralow Power Boost Converter Linear Technology Corporation
LT8415 Ultralow Power Boost Converter Linear Technology
LT8471 Dual Multitopology DC/DC Converters Linear Technology Corporation
LT8490 Buck-Boost Battery Charge Controller Linear Technology Corporation

Other Datasheets by Analog Devices

Part Number Description
LT8491 High Voltage Buck-Boost Battery Charge Controller
LT8210 4-Switch Buck-Boost DC/DC Controller
LT8228 Bidirectional Synchronous 100V Buck/Boost Controller
LT8302 Micropower No-Opto Isolated Flyback Converter
LT8302-3 Micropower No-Opto Isolated Flyback Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Data Sheet LT8418 100V Half-Bridge GaN Driver with Smart Integrated Bootstrap Switch FEATURES  Half-Bridge Gate Driver for GaN FETs  0.6Ω Pull-Up Resistance at Top Gate Driver  0.2Ω Pull-Down Resistance at Bottom Gate Driver  4A Peak Source, 8A Peak Sink Current Capability  Smart Integrated Bootstrap Switch  Split-Gate-Driver to Adjust Turn-On/Turn-Off Strength  Default Low-State for All Driver Inputs and Outputs  Maximum 15V Voltage Rating at INT and INB Inputs  Independent INT, INB Inputs with TTL Logic Compatible  Fast Propagation Delay: 10ns (Typical)  Propagation Delay Matching: 1.5ns (Typical)  Balanced Driver Supply Voltage: VBST ≈ VCC = 3.85V – 5.