Datasheet4U Logo Datasheet4U.com

OP97 - High Precision Operational Amplifier

General Description

The OP97 is a low power alternative to the industry-standard OP07 precision amplifier.

The OP97 maintains the standards of performance set by the OP07 while utilizing only 600 μA supply current, less than 1/6 that of an OP07.

Key Features

  • Low supply current: 600 μA maximum OP07 type performance Offset voltage: 20 μV maximum Offset voltage drift: 0.6 μV/°C maximum Very low bias current 25°C: 100 pA maximum.
  • 55°C to +125°C: 250 pA maximum High common-mode rejection: 114 dB minimum Extended industrial temperature range:.
  • 40°C to +85°C.

📥 Download Datasheet

Datasheet Details

Part number OP97
Manufacturer Analog Devices
File Size 512.73 KB
Description High Precision Operational Amplifier
Datasheet download datasheet OP97 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
OP90 Precision Low Voltage Micropower Operational Amplifier Maxim Integrated Products
OP900SL PN Silicon Photodiode TT
OP905 PIN Silicon Photodiode TT
OP906 PIN Silicon Photodiode TT
OP910 PIN SILICON PHOTODIODE ETC

Other Datasheets by Analog Devices

Part Number Description
OP90 Precision Low-Voltage Micropower Operational Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FEATURES Low supply current: 600 μA maximum OP07 type performance Offset voltage: 20 μV maximum Offset voltage drift: 0.6 μV/°C maximum Very low bias current 25°C: 100 pA maximum −55°C to +125°C: 250 pA maximum High common-mode rejection: 114 dB minimum Extended industrial temperature range: −40°C to +85°C GENERAL DESCRIPTION The OP97 is a low power alternative to the industry-standard OP07 precision amplifier. The OP97 maintains the standards of performance set by the OP07 while utilizing only 600 μA supply current, less than 1/6 that of an OP07. Offset voltage is an ultralow 25 μV, and drift over temperature is below 0.6 μV/°C. External offset trimming is not required in the majority of circuits. Improvements have been made over OP07 specifications in several areas.