Datasheet4U Logo Datasheet4U.com

AIC1804 - Three- Or Four-Cell Lithium-Ion Battery Protection IC

General Description

The AIC1804 is designed to protect the lithiumion battery from damage or degrading the lifetime due to overcharging, overdischarging and overcurrent for three- or four-cell lithium-ion battery powered systems such as notebook PCs.

Key Features

  • l n.

📥 Download Datasheet

Datasheet Details

Part number AIC1804
Manufacturer Analog Intergrations Corporation
File Size 170.36 KB
Description Three- Or Four-Cell Lithium-Ion Battery Protection IC
Datasheet download datasheet AIC1804 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AIC1845 Regulated 5V Charge Pump In SOT-23 Analog Integrations
AIC1848 Regulated 5V Charge Pump In SOT-23 Analog Integrations
AIC1084 5A Low Dropout Positive Adjustable Regulator Analog Integrations
AIC111 IC Design Specification 1.3-V microPower(TM) DSP/uC Voice Band Audio CODEC (Rev. A) ETCTI
AIC1221 Ultra LDO 2A Linear Regulator aic

Other Datasheets by Analog Intergrations Corporation

Part Number Description
AIC1802 Two-Cell Lithium-Ion Battery Protection IC
AIC1803 Three-Cell Lithium-Ion Battery Protection IC
AIC1811 One-Cell Lithium-Ion Battery Protection IC
AIC1821 One-Cell Lithium-Ion Battery Protection
AIC1840 REGULATED GaAsFET BIAS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AIC1804 Three- Or Four-Cell Lithium-Ion Battery Protection IC n FEATURES l n DESCRIPTION The AIC1804 is designed to protect the lithiumion battery from damage or degrading the lifetime due to overcharging, overdischarging and overcurrent for three- or four-cell lithium-ion battery powered systems such as notebook PCs. It can also provide the cell-balancing “bleeding” function to automatically discharge the overcharged cell until the overcharge condition is released. Safe and full utilization charging is ensured by the accurate ± 30mV overcharge detection. Four different specification values for overcharge protection voltage are provided for various protection requirements. The very low standby current drains little current from the cell while in storage.