C150N50Z4 Datasheet | Anaren Microwave

Model C150N50Z4 Surface Mount Termination 150 Watts, 50Ω Description The C150N50Z4 is high performance Aluminum Nitride (Al N) surface mount termination intended as a cost petitive alternative to Beryllium Oxide (Be O). The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating high power 90 degree couplers and for use in microstrip circuits. The termination is also Ro HS pliant! Features : - Ro HS pliant - 150 Watts - DC - 4.0 GHz - Al N Ceramic - Non-Nichrome Resistive Element - Low VSWR - 100% Tested - Small Size General Specifications Resistive Element Substrate Terminal Finish Operating Temperature Thick film Al N Ceramic Matte Tin over Nickel Barrier -50 to +200°C (see de rating chart) Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Electrical Specifications Resistance Value: Power: Frequency Range: Return Loss 50 Ohms, ± 2% 150 Watts DC - 4.0 GHz >24 d B DC - 2.7 GHz >20 d B DC - 4.0 GHz Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. Outline Drawing UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES 1 of 2 Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44...