Datasheet4U Logo Datasheet4U.com

ATS20 - LOW-VOLTAGE ULTRA-LOW-POWER TEMPERATURE SENSOR

General Description

The aTS20 is a precision CMOS temperature sensor that provides a cost-effective solution for spaceconstrained applications.

The output voltage ramp of the aTS20 has a negative slope of -11.77mV/°C.

Key Features

  • actual part marking below Extremely Low Power Precision Calibrated to ±2°C at 25°C Ultra Low Operating Current : ≤ 12μA Temperature Range: -40°C to 125°C Linear Output Ramp: -11.77mV/°C Output Ramp is Calibrated to Degrees Celsius Low Self Heating: 0.01°C typical in still air Accuracy (°C) Uses a Single Positive Supply Operating Voltage Range: +2.4V to +6V Non-linearity: ≤ 0.8°C 3 2 1 0 -1 -2 -3.

📥 Download Datasheet

Datasheet Details

Part number ATS20
Manufacturer Andiglog
File Size 270.86 KB
Description LOW-VOLTAGE ULTRA-LOW-POWER TEMPERATURE SENSOR
Datasheet download datasheet ATS20 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ATS2012UV365 UV LED Kingbright
ATS2012UV415 UV LED Kingbright
ATS22D75Q soft starter Schneider
ATS25 Manual Linear Positioning Stage Aerotech
ATS2501 Third generation single-chip highly-integrated digital music system solution Actions

Other Datasheets by Andiglog

Part Number Description
ATS45C LOW-VOLTAGE ULTRA-LOW-POWER TEMPERATURE SENSOR
ATS50 LOW-VOLTAGE SOT-23 TEMPERATURE SENSOR
ATS51 LOW-VOLTAGE SOT-23 TEMPERATURE SENSOR
ATS75 LOW- OLTAGE 2-WIRE DIGITAL TEMPERATURE SENSOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com aTS20 LOW-VOLTAGE ULTRA-LOW-POWER TEMPERATURE SENSOR New Release Specification General Description The aTS20 is a precision CMOS temperature sensor that provides a cost-effective solution for spaceconstrained applications. The output voltage ramp of the aTS20 has a negative slope of -11.77mV/°C. With a supply voltage of 2.4V to 6V, the aTS20 is accurate to ± 2°C at 25°C, and to ± 3°C over the range of −40°C to 125°C. Reducing the supply voltage to 2.4V does not change the negative and positive temperature extremes. As well, the aTS20 does not require external calibration. Calibration of each device is performed at the factory.