AT26LS31 - Quad High Speed Differential Line Driver

Product Overview

Part number	AT26LS31
Manufacturer	Anloy Technologies
File Size	234.17 KB
Description	Quad High Speed Differential Line Driver
Datasheet	AT26LS31 Datasheet
Additional preview pages of the AT26LS31 datasheet.

The AT26LS31 is a quad-differential line driver, designed for digital data transmission over balanced lines.

The AT26LS31 meets all the requirements of EIA standard RS422.

It is designed to provide unipolar differential drive to twisted pair or parallel wire transmission lines.

» Operating Temperature range of +125°C to -55°C » Output Skew - 2.0 ns typical » Input to Output Delay - 12 ns » Operation from single +5V supply » Outputs won't load line when VCC = 0V » Output short-circuit protection » Complementary Outputs » Meets the requirements of EIA standard RS-422 » High Output Drive Capability for 100Ω terminated transmission lines » Advanced low-power Schottky processing Quad High Speed Differential Line Driver AT26LS31 Device Pin Outs Ceramic LCC E Suffix TO-99 2.

AT26DF041 - SERIAL FIRMWARE DATAFLASH-R (ATMEL Corporation)
AT26DF081A - 8-megabit 2.7-volt Minimum SPI Serial Flash Memory (ATMEL Corporation)
AT26DF161 - 16-megabit 2.7-volt Only Serial Firmware DataFlash Memory (ATMEL Corporation)
AT26DF321 - 32-megabit 2.7-volt Only Serial Firmware DataFlash Memory (ATMEL Corporation)
AT26DF321 - (AT25DF321 / AT26DF321) 32M-Bit Serial Firmware Dataflash Memory (ATMEL Corporation)
AT26F004 - Serial Firmware DataFlash Memory (ATMEL Corporation)
AT20-0106 - Digital Attenuator/ 50 dB/ 6-Bit/ TTL Driver/ DC - 2 GHz (Tyco Electronics)
AT20-0107 - Digital Attenuator/ 31.5 dB/ 6-Bit/ TTL Driver/ DC - 2.0 GHz (Tyco Electronics)
AT20-0263 - Digital Attenuator/ 31 dB/ 5-Bit/ TTL Driver/ DC - 2 GHz (Tyco Electronics)
AT20-0273 - Digital Attenuator/ 32 dB/ 2-Bit/ TTL Driver/ DC - 2 GHz (Tyco Electronics)

Other Datasheets by Anloy Technologies

Published: Apr 26, 2019 |