APA2065 Datasheet | Anpec Electronics Coropration

Features - - - .. General Description APA2065 is a monolithic integrated circuit, which provides precise DC volume control, and a stereo bridged audio power amplifiers capable of producing 2.7W(2.0W) into 3Ω with less than 10%(1.0%) THD+N. The attenuator range of the volume control in APA2065 is from 20d B (DC_Vol=0V) to -80d B (DC_Vol=3.54V) with 32 steps. The advantage of internal gain setting can be less ponents and PCB area. Both of the depop circuitry and the thermal shutdown protection circuitry are integrated in APA2065, that reduce pops and clicks noise during power up or shutdown mode operation. It also improves the power off pop noise and protects the chip from being destroyed by over temperature and short current failure. To simplify the audio system design, APA2065 bines a stereo bridge-tied loads (BTL) mode for speaker drive and a stereo single-end (SE) mode for headphone drive into a single chip, where both modes are easily switched by the SE/BTL input control pin signal. Low Operating Current with 14m A Improved Depop Circuitry to Eliminate Turn-on and Turn-off Transients in Outputs High PSRR 32 Steps Volume Adjustable by DC Voltage with Hysteresis 2W per Channel Output Power into 4Ω Load at 5V, BTL Mode Two Output Modes Allowable with BTL and SE Modes Selected by SE/BTL pin Low Current Consumption in Shutdown Mode (50µA) Short Circuit Protection Power Off Depop Circuit Integration PDIP-16 & SOP-16 Packages Available Lead Free Available (Ro HS pliant) - - - - - - - - Applications - - Note Book PC LCD Monitor or TV ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright © ANPEC Electronics Corp. Rev. A.4 - Aug., 2005 1 .anpec..tw Ordering and Marking Information Lead Free Code Handling Code Temp. Range Package Code .. APA2065 J : Package Code J : PDIP-16 K : SOP-16 Temp....