• Part: APW7093
  • Description: Step Down DC/DC Regulator
  • Category: Voltage Regulator
  • Manufacturer: Anpec Electronics Coropration
  • Size: 770.37 KB
Download APW7093 Datasheet PDF
Anpec Electronics Coropration
APW7093
APW7093 is Step Down DC/DC Regulator manufactured by Anpec Electronics Coropration.
Features - - - - Source/Sink 3A Up to 1MHz Switches Frequency Up to 94% Efficiency Internal PMOS/NMOS Switches - 70mΩ/40mΩ On-Resistance at VIN = 4.5V - 90mΩ/60mΩ On-Resistance at VIN = 3V ±1% Output Accuracy 1.1V to VIN Adjustable Output Voltage 3V to +5.5V Input Voltage Range <1µA Shutdown Supply Current Programmable Constant-Off-Time Operation Thermal Shutdown Adjustable Soft-Start Inrush Current Limiting Output Short-Circuit Protection Lead Free Available (Ro HS pliant) General Description The APW7093 is a reversible energy flow, constantoff-time, pulse-width modulated (PWM), step-down DC-DC converter. It is ideal for use in notebook and sub-notebook puters that require 1.1V to 5V active termination power supplies. This device features an internal PMOS power switch and internal synchronous rectifier for high efficiency and reduced ponent count. The internal 90mΩ PMOS power switch and 60mΩ NMOS synchronous-rectifier switch easily deliver continuous load currents up to 3A. The APW7093 accurately tracks an external reference voltage, produces an adjustable output from 1.1V to VIN, and achieves efficiencies as high as 94%. The APW 7093 uses a unique current-mode, constant-off-time, PWM control scheme that allows the output to source or sink current. This feature allows energy to return to the input power supply that otherwise would be wasted. The programmable constant-off-time architecture sets switching frequencies up to 1MHz, allowing the user to optimize performance trade-offs between efficiency, output switching noise, ponent size, and cost. The APW7093 features an adjustable soft-start to limit surge currents during startup, a 100% duty-cycle mode for low-dropout operation, and a low-power shutdown mode that disables the power switches and reduces supply current below 1µA. The APW7093 is available in a 32-pin QFN with an exposed backside pad or a 16-pin SSOP. .. - - - - - - - - - Applications - - - - - - - Motherboard Graphics Cards Cable or DSL Modems, Set...