APL5522 Datasheet | Anpec Electronics

Dual-Channel, 3.3V/500m A and 2.5V/500m A Linear Regulator Features - Fixed Output Voltage : VOUT1=3.3V/500m A (within Maximum Power Dissipation) VOUT2=2.5V/500m A (within Maximum Power Dissipation) General Description The APL5522 is a dual low dropout regulator with output 1 with 3.3V/0.5A and output2 with 2.5V/0.5A output capability. In order to obtain lower dropout voltage and faster transient response, which is critical for low voltage applications, the APL5522 has been optimized. VOUT1 typical dropout voltage is 550m V at 500m A loading and VOUT2 typical dropout voltage is 630m V at 500m A loading. Current limit is trimmed to ensure specified output current and controlled short-circuit current. On-chip thermal limiting provides protection against any bination of overload that would create excessive junction temperatures. The APL5522 regulator es in a SOP-8 and SOP-8P packages. - Low Dropout Voltage (Defined as the Minimum Input/Output Voltage Difference): Output 1 Dropout Voltage : 550m V (at 500m A) Output 2 Dropout Voltage : 630m V (at 500m A) - - - - - - - - Stable with 4.7µF Output Capacitor(at VOUT1 ) Stable with 4.7µF Output Capacitor(at VOUT2 ) No Protection Diodes Needed Built-In Thermal Protection Built-In Current-Limit Protection Fast transient Response Short Setting Time SOP-8 and SOP-8P Packages Available Lead Free and Green Devices Available (Ro HS pliant) Pin Configuration SOP-8 Top View SOP-8P Top View VOUT1 VIN VIN VOUT2 1 2 3 4 8 7 6 5 GND GND GND GND VOUT1 VIN VIN VOUT2 1 2 3 4 8 7 6 5 NC GND NC NC Applications - - - Desktop puter Networking Systems Optical Data Storage Systems = Thermal Pad (The thermal pad of SOP-8P has to be connected to the GND plane to get better heat dissipation than SOP-8.) ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright ©...