MT9T031 Datasheet | Aptina Imaging Corporation

Features Aptina® Digital Clarity® imaging technology High frame rate Global reset release Horizontal and vertical binning Column and row skip modes Superior low-light performance Low dark current Simple two-wire serial interface Programmable controls: Gain, frame rate, frame size, exposure - Pin-for-pin patible with Aptina’s 1.3-megapixel MT9M001 - - - - - - - - - Table 1: Key Performance Parameters Parameter Typical Value 1/2-inch (4:3) 6.55mm(H) x 4.92mm(V) 8.19 (Diagonal) 2,048H x 1,536V 3.2μm x 3.2μm RGB Bayer pattern Global reset release (GRR), electronic rolling shutter (ERS) 48 MPS/48 MHz Programmable up to 12 fps Programmable up to 20 fps Programmable up to 39 fps Programmable up to 43 fps Programmable up to 93 fps 10-bit, on-chip >1.0 V/lux-sec (550nm) 61d B 43d B 3.0V- 3.6V (3.3V nominal) 244m W (nominal); 1.65μW (standby) 0°C to 60°C 48-pin CLCC Optical format Active imager size Active pixels Pixel size Color filter array Shutter type Maximum data rate/ master clock QXGA (2,048 x 1,536) UXGA Frame (1,600 x 1,200) rate HDTV (1,280 x 720) XGA (1,024 x 768) VGA (640 x 480) ADC resolution Responsivity Dynamic range SNRMAX Supply voltage Power consumption Operating temperature Packaging Applications - - - - - High resolution network cameras Wide field of view cameras Dome cameras with electronic pan, tilt, and zoom Hybrid video cameras with high resolution stills Detailed feature extraction for smart cameras The Aptina® MT9T031 is a QXGA-format 1/2-inch CMOS active-pixel digital image sensor with an active imaging pixel array of 2,048H x 1,536V. It incorporates sophisticated camera functions on-chip such as windowing, column and row skip mode, and snapshot mode. It is programmable through a simple two-wire serial interface. The 3-megapixel CMOS image sensor features Digital Clarity- Aptina’s breakthrough low-noise CMOS imaging technology that achieves CCD image quality (based on signal-to-noise ratio and low-light sensitivity) while maintaining the inherent...