MT9V022 Datasheet | Aptina Imaging Corporation

Features .. 1/3-Inch Wide-VGA CMOS Digital Image Sensor For the latest data sheet revision, refer to Aptina’s Web site: .aptina. Features Table 1: Key Performance Parameters Value 1/3-inch 4.51mm(H) x 2.88mm(V) 5.35mm diagonal 752H x 480V 6.0μm x 6.0μm Monochrome or color RGB Bayer pattern Global shutter- True SNAP™ 26.6 MPS/26.6 MHz 752 x 480 60 fps (at full resolution) 10-bit column-parallel 4.8 V/lux-sec (550nm) >55d B linear; >80d B- 100d B in Hi Dy mode 3.3V +0.3V (all supplies) <320m W at maximum data rate; 100?W standby power -40°C to +85°C 52-Ball IBGA, automotive-qualified; wafer or die - Aptina® Digital Clarity® CMOS imaging technology - Array format: Wide-VGA, active 752H x 480V (360,960 pixels) - Global shutter photodiode pixels; simultaneous integration and readout - Monochrome or color: Near_IR enhanced performance for use with non-visible NIR illumination - Readout modes: progressive or interlaced - Shutter efficiency: >99% - Simple two-wire serial interface - Register Lock capability - Window Size: User programmable to any smaller format (QVGA, CIF, QCIF, etc.). Data rate can be maintained independent of window size - Binning: 2 x 2 and 4 x 4 of the full resolution - ADC: On-chip, 10-bit column-parallel (option to operate in 12-bit to 10-bit panding mode) - Automatic Controls: Auto exposure control (AEC) and auto gain control (AGC); variable regional and variable weight AEC/AGC - Support for four unique serial control register IDs to control multiple imagers on the same bus - Data output formats: - Single sensor mode: 10-bit parallel/stand-alone 8-bit or 10-bit serial LVDS - Stereo sensor mode: Interspersed 8-bit serial LVDS Parameter Optical format Active imager size Active pixels Pixel size Color filter array Shutter type Maximum data rate/ master clock Full resolution Frame rate ADC resolution Responsivity Dynamic range Supply voltage Power consumption Operating temperature Packaging Ordering Information Table 2: Available Part...