BXA10 Datasheet | Artesyn Technologies

features include overvoltage protection, continuous short circuit protection with automatic recovery and remote on/off, all of which minimize the need for external circuitry and make the BXA10 a remended ponent in distributed power systems. 2 YEAR WARRANTY All specifications are typical at nominal input, full load at 25°C unless otherwise stated SPECIFICATIONS OUTPUT SPECIFICATIONS Line regulation Load regulation Minimum load Overshoot Ripple and noise (See Note 2) Transient response LL to HL, single output LL to HL, dual output 10% to 100% FL (See Note 4) 48V models 12V models At start-up 5Hz to 20MHz 25% load step ±0.2% ±0.2% ±0.5% EMC CHARACTERISTICS Conducted emissions ESD air ESD contact Surge Fast transients Radiated immunity Conducted immunity EN55022, FCC, (See Note 8) EN61000-4-2, level 2 Perf. EN61000-4-2, level 3 Perf. EN61000-4-5, level 2 Perf. EN61000-4-4, level 2 Perf. EN61000-4-3, level 3 Perf. EN61000-4-6, level 3 Perf. Level A criteria 1 criteria 1 criteria 1 criteria 1 criteria 1 criteria 1 10% full load No minimum load 10% max. 100m V pk-pk, max. 20m V rms ±2.0% max. dev., 250µs recovery to within ±1.0% ±0.02%/°C max. GENERAL SPECIFICATIONS Efficiency Isolation voltage Switching frequency Approvals and standards Case material Material flammability Weight Input/output Input or output to case Fixed Safety See table 1500VDC 1000VDC 400k Hz VDE0805, EN60950, IEC950 UL1950, CSA C22.2 No. 950 Temperature coefficient Overvoltage protection Short circuit protection INPUT SPECIFICATIONS Input voltage range Input filter Start up surge current Remote ON/OFF ON (See Note 3) OFF OFF idle current Start-up time Resistive load 12VDC (See Note 6) 48VDC Clamp type Hiccup See table Continuous automatic recovery Black coated, six-sided metal case UL94V-0 20g (0.71oz) MIL-HDBK-217F Bellcore 519,000 hours >2 million hours 9 to 18VDC 18 to 75VDC Pi type 1.5A max. MTBF ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient -25°C to +71°C (See...