BXA75 Datasheet | Artesyn Technologies

features include remote enable, remote sense and external trim. SPECIFICATION OUTPUT SPECIFICATIONS Voltage adjustability Voltage accuracy Remote sense Total error band Line regulation Load regulation Ripple and noise All specifications are typical at nominal input, full load at 25°C unless otherwise stated EMC CHARACTERISTICS +10%, -3.0% +10%, -5.0% ±0.5% 0.5V line drop pensation Conducted noise Surge susceptibility EN55022, FCC (See Note 4) Level A 100V No damage 3.3V and 15V 5V and 12V GENERAL SPECIFICATIONS Efficiency Isolation voltage Switching frequency Approvals and standards Case material Material flammability Weight MTBF Bellcore, 25°C baseplate See table 1500VDC 500k Hz ±5.0% VDE0805, EN60950 IEC950, UL1950 CSA C22.2 No. 950 Plastic with aluminum baseplate UL94V-0 160g (5.65oz) 2,600,000 hours minimum (See Note 2) Typical Typical ±2.0% ±0.15% ±0.3% 5Hz-20MHz, 50m V pk-pk (See Note 3) 15m V rms max. No external capacitor 100m V pk-pk, 25m V rms max. ±4.0% max. dev. 100µs recovery to within 1% Vo ±0.02%/°C Max. (See Note 5) Yes, see table Continuous automatic recovery Transient response (75% to 100% load step) Temperature coefficient Overvoltage protection Short circuit protection INPUT SPECIFICATIONS Input voltage range Input filter Remote ON/OFF Logic patibility ON OFF Shutdown idle current (See Note 4) (Ref. to -Vin) ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 6) Operating, See curves -25°C to +85°C Non-operating - 55°C to +125°C Over temperature 115°C internal shutdown temperature auto. recovery Operating Non operating 5Hz to 500Hz 10,000 feet max. 40,000 feet max. 2.4G RMS (approx.) 36 to 75VDC Yes CMOS/TTL >3.5VDC or open circuit <0.8VDC Less than 50m A Altitude Vibration International Safety Standard Approvals VDE0805/E...