PM396D Datasheet | Artesyn Technologies

feature 13 single, 17 dual and 10 triple output models. This series is designed for special applications where mounting on a housing or metal chassis is required. Input/output connections are made to screw terminals on a barrier terminal strip and mounting is made convenient by means of four threaded inserts in the bottom of each module. For maximum safety, all power transformers are split bobbin wound, rather than layer wound, to give total isolation between primary and secondary. Overvoltage crowbar protection is standard on all 5V outputs for protection of logic circuitry. Standard input voltage is 115VAC at 47 to 400Hz; other optional inputs are 220, and 240VAC. Input/output isolation voltage is 2500VAC. Output current limiting and short circuit protection are standard. SPECIFICATION OUTPUT SPECIFICATIONS Voltage accuracy Line regulation Load regulation Temperature coefficient Overvoltage protection Output power limit Short circuit protection INPUT SPECIFICATIONS All specifications are typical at nominal input, full load at 25°C unless otherwise stated GENERAL SPECIFICATIONS ±1.0%, max. See table on facing page See table on facing page ±0.02%/°C Efficiency Isolation voltage Isolation capacitance Approvals and standards Case material Weight MTBF ENVIRONMENTAL SPECIFICATIONS Case C1 Case C2 Safety Input/output, no suffix Suffix "-D" and "-K" 40% typical 700VAC 2500VAC 50p F UL478 CSA22.2-143 and -154 Non-conductive black plastic 567g (20.02oz) 816g (28.80oz) 710,000 hours See table for relevant models 6.2V typ. 130% to 200% FL typ. 100% to 200% FL Input voltage range No suffix Suffix "-D" Suffix "-K" See Note 1 115V±10VAC 220V±20VAC 240V±20VAC 47Hz to 400Hz Temperature Input frequency range Operating ambient - 25°C to +71°C Non-operating amb. - 25°C to +85°C Derating, 50°C to 71°C 2.5%/°C Cooling Free-air convection Non-condensing 20% to 95% RH Relative Humidity PAGE 1 AC/DC ENCAPSULATED MODULES | 2.5-15W AC 2.5 to 15 Watt AC/DC encapsulated...