SIL10E Datasheet | Artesyn Technologies

.. SIL10E Series DC/DC CONVERTERS - - - - - - - E Class Non-isolated Single output 1 NEW Product 10A Current rating Input voltage range: 3.0V - 5.5V Output voltage range: 0.8V - 3.63V Ultra high efficiency: 95% @ 5Vin and 3.3Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of >7 million hours per Telcordia SR-332 - Ideal solution where board space is at a premium or tighter card pitch is required - Industry standard footprint and pin out The SIL10E series are non-isolated DC/DC converters packaged in a single-in-line footprint giving designers a cost effective solution for conversion from either a 5V or a 3.3V source. The SIL10E offers a range of fixed outputs and one wide trim output unit at an industry leading 10A which allows maximum design flexibility and a pathway for future upgrades. The SIL10E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface mount technology and automated manufacturing techniques, the SIL10E offers pact size and efficiencies of up to 95%. 2 YEAR WARRANTY All specifications are typical at nominal input, full load at 25°C unless otherwise stated SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage adjustability Fixed output versions 5Vin with wide trim 3.3Vin with wide trim ±10% 3.6V to 0.8V 2.75V to 0.8V ±2.7% ±1.0% ±1.0% 0A None 50m V pk-pk 25m V rms max. ±0.01%/ºC 50m V max. deviation 50µs recovery to within ±1.0% 10% Vo pensation EMC CHARACTERISTICS Electrostatic discharge Conducted immunity Radiated immunity EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 Setpoint accuracy Line regulation Load regulation Minimum load Overshoot/undershoot Ripple and noise 0 to 20MHz BW Temperature co-efficient Transient response GENERAL SPECIFICATIONS Efficiency Insulation voltage Switching frequency Approvals and standards Material flammability Dimensions (Vertical version) Pin length Weight...