SIL15C Datasheet | Artesyn Technologies

.. SIL15C Series DC/DC CONVERTERS - - - - C Class Non-isolated 5Vin and 12Vin single output 1 NEW Product 15A current rating Input voltage range: 4.5V - 5.5V or 10.2V - 13.8V Output voltage range: 0.9V - 5.0V Industry leading value - Cost optimised design - Excellent transient response - Output Voltage adjustability - Pathway for future upgrades - Supports silicon voltage migration - Resulting in reduced design-in and qualification time - Designed in reliability: MTBF of >7 million hrs per Telcordia SR-332 The SIL15C Series is a new high density open frame non-isolated converter for spacesensitive applications. Each model has a wide input range (4.5V to 5.5V or 10.2V to 13.8V) and offer a wide 0.9V to 3.3V/5V output voltage range with a 15A load. An external resistor adjusts the output voltage from its pre-set value of 0.9V to any value up to the maximum allowed value for that model. Typical efficiencies are 89% for the 5V input version and 91% for the 12V input version. The SIL15C series offers remote ON/OFF and over-current protection as standard. With full international safety approval including EN60950 and UL/c UL60950, the SIL15C reduces pliance costs and time to market. All specifications are typical at nominal input, full load at 25°C unless otherwise stated 2 YEAR WARRANTY SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage adjustability (See Note 5) 5V input models 12V input models 0.9V to 3.3V 0.9V to 5.0V ±2.5% ±0.2% max. ±0.5% max. 0A/15A 5V input models 12V input models 3% max. 1% max. 100m V max. (See Note 1) Deviation See table 100m V 200µs recovery to within regulation band INPUT SPECIFICATIONS (CONTD.) Turn ON threshold Turn OFF threshold 5Vin 12Vin 5Vin 12Vin 4.5VDC 9.0VDC 4.3VDC 7.5VDC Output setpoint accuracy With 1.0% trim resistors Line regulation Load regulation Min/max load Overshoot (at turn on) Undershoot Ripple and noise 5Hz to 20MHz Transient response (See Note 2) Low line to high line Full load to min. load GENERAL SPECIFICATIONS...