AK4170 Datasheet | Asahi Kasei Microdevices

Features n Ultra smooth output waveform n Support full speed(12Mbps) and low speed(1.5Mbps) n Single Power Supply 3.3 volts ± 10% n 16pin TSSOP package n Functionally patible to Philips PDIUSBP11 n Support suspend mode USB Transceiver n Pin Layout OEN FAST RDIFF SUS RSHP RSHN + - VDD AK4170 Block Diagram DP DN NC 1 OEN 2 RDIFF 3 RSHP 4 RSHN 5 SUS 6 VSS 7 NC 8 16 VDD 15 INN 14 INP 13 DP 12 DN 11 FAST 10 NC 9 NC <M0066-E-01> -1- <1999/09> [ASAHI KASEI] [AK4170] Pin/Function No. Signal Name 1 NC 2 OEN 3 RDIFF 4 RSHP 5 RSHN 6 SUS 7 VSS 8 NC 9 NC 10 NC 11 FAST 12 DN 13 DP 14 INP 15 INN 16 VDD I/O Description - Not Connected I Output Enable Pin (CMOS level digital input) Low input enables transmit data, it is that both INP and INN output onto DP and DN pins. High input enable receive mode, which disables the outputs of DP and DN, and the buffer goes into high-z state. O Differential Receiver Output (CMOS level digital output) When DP > DN, the output is “H”. When DP < DN, the output is “L”. When both DP and DN are “L”, the output is not guaranteed. this pin also outputs correctly regardless of the OEN input. O Schmitt Hysteresis Receiver Output for DP (D+) input (CMOS level digital output) When DP is high level, RSHP is high. When DP is low level, RSHP is low this pin also outputs correctly regardless of the OEN input. O Schmitt Hysteresis Receiver Output for DN (D-) input (CMOS level digital output) When DN is high level, RSHN is high. When DN is low level, RSHN is low this pin also outputs correctly regardless of the OEN input. I Suspend Mode Control Pin (CMOS level) High input forces the RDIFF output to low level, and the AK4170 goes into low power consumption mode regardless of OEN pin. P Ground Pin - Not Connected - Not Connected - Not Connected I Full Speed/Low Speed Control Input (CMOS digital input) Low input activates the AK4170 to Low Speed (1.5Mbps) mode. High input activates the AK4170 to Full Speed (12Mbps) mode. I/O...