AtlanTecRF APS-1006-A
The SW75 Series features a stainless steel IP69K rated enclosure with sealed bolts and waterproof connector for applications in wash down and corrosive environments. The SW75 comes equipped with NPN and PNP signal input for strobe and offers a 0-10 VDC analog intensity control as well as a manual intensity control potentiometer.| Part No. | APS-1006-A |
|---|---|
| Datasheet | APS-1006-A Download |
| Manufacturer | AtlanTecRF |
| Description | PIN Diode Switches |
| Buy | Stock & Price |
SW75 Series WASHDOWN Brick Light product introduction Six high current LED’s are mounted to an aluminum back plate of which is mounted to the stainless steel enclosure for extra heat dissipation ability. product features
●
●
●
●
●
●
●
● IP69K Standards Stainless Steel 316 Housing Meets FDA Compliancy PNP and NPN Strobe input Continuous operation or Strobe mode Dimmable via built in potentiometer Analog intensity 0-10VDC signal Six, 1mm² Die High Current LEDs product specifications Electrical Input Current Wattage Strobe Input PNP Line NPN Line Continuous Mode Potentiometer Analog Intensity Connection Ambient Temp. Lifespan IP Rating Compliances Weight IEC 62471 Rating 24 VDC +/- 5% Max. 400mA Max. 9.6W PNP ► +3VDC or greater to activate. │ NPN ► GND (<1VDC) to activate 30.4mA @ 24 VDC 3.7mA @ 3VDC │6.2mA @ 5VDC │ 12.6mA @ 10VDC │ 22mA @ Common (0VDC) Light will be in continuous mode by leaving signal on strobe input active Intensity control of 10% to 100% Clockwise increases intensity...
●
●
●
●
●
●
●
● IP69K Standards Stainless Steel 316 Housing Meets FDA Compliancy PNP and NPN Strobe input Continuous operation or Strobe mode Dimmable via built in potentiometer Analog intensity 0-10VDC signal Six, 1mm² Die High Current LEDs product specifications Electrical Input Current Wattage Strobe Input PNP Line NPN Line Continuous Mode Potentiometer Analog Intensity Connection Ambient Temp. Lifespan IP Rating Compliances Weight IEC 62471 Rating 24 VDC +/- 5% Max. 400mA Max. 9.6W PNP ► +3VDC or greater to activate. │ NPN ► GND (<1VDC) to activate 30.4mA @ 24 VDC 3.7mA @ 3VDC │6.2mA @ 5VDC │ 12.6mA @ 10VDC │ 22mA @ Common (0VDC) Light will be in continuous mode by leaving signal on strobe input active Intensity control of 10% to 100% Clockwise increases intensity...