Atmel AT17F16
The AT17F16 is packaged in the 8-pad LAP and 20-lead PLCC packages (Table 1). The AT17F16 uses a simple serial-access procedure to configure one or more FPGA devices. The AT17F16 can be programmed with industry-standard programmers, the Atmel ATDH2200E Programming Kit, or the Atmel ATDH2225 ISP Cable.| Part No. | AT17F16 |
|---|---|
| Datasheet | AT17F16 Download |
| Manufacturer |  Atmel |
| Description | FPGA Configuration Flash Memory |
| Buy | Stock & Price |
FEATURES
DATASHEET● Programmable 16,777,216 x 1-bit Serial Memories Designed to Store Configuration Programs for Field Programmable Gate Arrays (FPGAs)
● 3.3V Output Capability
● 5.0V Tolerant I/O Pins
● Program Support using the Atmel ATDH2200E System, ATDH2225 ISP Cable, or Third-party Programmers
● In-System Programmable (ISP) via 2-wire Bus
● Simple Interface to SRAM FPGAs
● Compatible with Atmel AT40K and AT94K Devices, Altera® FLEX®, APEX™ Devices, Lucent® ORCA® FPGAs, Xilinx® XC3000, XC4000, XC5200, Spartan®, Virtex® FPGAs, Motorola® MPA1000 FPGAs
● Cascadable Read-back to Support Additional Configurations or Higher-density Arrays
● Low-power CMOS FLASH Process
● Available in 8-pad LAP (Pin-compatible with 8-lead SOIC/VOIC Footprint Packages) and 20-lead PLCC Packages
● Emulation of the Atmel AT24C Serial EEPROMs
● Low-power Standby Mode
● Single Device Capable of Holding Four Bitstream Files Allowing Simple System Reconfiguration
● Fast Serial Download Speeds up to 33MHz
● End...
