Atmel AT17F32
The AT17F Series of In-System Programmable Configuration PROMs (Configurators) provide an easy-to-use, cost-effective configuration memory for Field Programmable Gate Arrays. The AT17F Series Configurator uses a simple serial-access procedure to configure one or more FPGA devices. The AT17F Series Configurators can be programmed with industry-standard programmers, Atmel’s ATDH2200E Programming Kit or Atmel’s ATDH2225 ISP Cable.| Part No. | AT17F32 |
|---|---|
| Datasheet | AT17F32 Download |
| Manufacturer |  Atmel |
| Description | FPGA Configuration Flash Memory |
| Buy | Stock & Price |
FEATURES
● Programmable 33,554,432 x 1-bit Serial Memories Designed to Store Configuration Programs for Field Programmable Gate Arrays (FPGAs)● 3.3V Output Capability
● 5V Tolerant I/O Pins
● Program Support using the Atmel ATDH2200E System or Industry Third Party Programmers
● In-System Programmable (ISP) via 2-wire Bus
● Simple Interface to SRAM FPGAs
● Compatible with Atmel AT40K and AT94K Devices, Altera® FLEX®, APEX™ Devices, Stratix™, Lattice Semiconductor® (ORCA®) FPGAs, Spartan®, Virtex™ FPGAs
● Cascadable Read-back to Support Additional Configurations or Higher-density Arrays
● Low-power CMOS FLASH Process
● Available in 44-lead PLCC Package
● Emulation of Atmel’s AT24CXXX Serial EEPROMs
● Low-power Standby Mode
● Single Device Capable of Holding 4 Bit Stream Files Allowing Simple System Reconfiguration
● Fast Serial Download Speeds up to 33 MHz
● Endurance: 10,000 Write Cycles Typical
● LHF Package Available (Lead and Halide Free) FPGA Configuration Flash Memory AT17F32 1.
DESCRIPTION
The AT17F Series device is packaged in the 44-lead PLCC, see Table 11.
