Atmel AT24C08A
The AT24C08A only uses the A2 input for hardwire addressing and a total of two 8K devices may be addressed on a single bus system. The A0 and A1 pins are no connects and can be connected to ground. The AT24C16A does not use the device address pins, which limits the number of devices on a single bus to one.| Part No. | AT24C08A |
|---|---|
| Datasheet | AT24C08A Download |
| Manufacturer |  Atmel |
| Description | 2-Wire Serial EEPROM |
| Buy | Stock & Price |
FEATURES
● Low-voltage and Standard-voltage Operation – 2.7 (VCC = 2.7V to 5.5V) – 1.8 (VCC = 1.8V to 5.5V)● Internally Organized 128 x 8 (1K), 256 x 8 (2K), 512 x 8 (4K), 1024 x 8 (8K) or 2048 x 8 (16K)
● Two-wire Serial Interface
● Schmitt Trigger, Filtered Inputs for Noise Suppression
● Bidirectional Data Transfer Protocol
● 100 kHz (1.8V) and 400 kHz (2.7V, 5V) Compatibility
● Write Protect Pin for Hardware Data Protection
● 8-byte Page (1K, 2K), 16-byte Page (4K, 8K, 16K) Write Modes
● Partial Page Writes Allowed
● Self-timed Write Cycle (5 ms max)
● High-reliability – Endurance: 1 Million Write Cycles – Data Retention: 100 Years
● Automotive Devices Available
● 8-lead JEDEC PDIP, 8-lead JEDEC SOIC, 8-lead Ultra Thin Mini-MAP (MLP 2x3), 5-lead SOT23, 8-lead TSSOP and 8-ball dBGA2 Packages
● Die Sales: Wafer Form, Waffle Pack and Bumped Wafers
DESCRIPTION
The AT24C01A/02/04/08A/16A provides 1024/2048/4096/8192/16384 bits of serial electrically erasable and programmable read-only memory (EEPROM) organized as 128/256/512/1024/2048 words of 8 bits each.
