Atmel AT43DK312A
The AT43DK312A comes with everything designers need to develop a full-featured USB Hub.| Part No. | AT43DK312A |
|---|---|
| Datasheet | AT43DK312A Download |
| Manufacturer |  Atmel |
| Description | USB Hub Development Kit |
| Buy | Stock & Price |
FEATURES
●●
●
●
● Instant Prototype With the AT43312A Hub Controller Reduce Design Cycle Reduce System Debugging Simplify Component Selection Avoid Typical Design Problems Overview To eliminate typical prototyping hassles, a fully populated stand-alone hub is included. Designers can take the stand-alone hub from the box to the system to see the operation of the AT43312A hub controller chip. An application note explains the component selection and resolves typical problems for the designer. USB Hub Development Kit AT43DK312A Rev. 1641A–04/00 1 Stand-alone Hub The hub may immediately be plugged into any USB system. The only requirements are that the system has an operational USB port and that the system has the USB drivers enabled on the operating system. The bus-powered portion of the controller will configure without the power supply attached. However, the power supply must be connected if the devices are to be attached to the downstream ports. Next, connect the upstream port to the USB connector on the computer.
