Atmel AT83C26
The AT83C26 is a smart card reader interface IC for smart card reader/writer applications such as EFT/POS terminals and set top boxes. It enables the management of any type of smart card from any kind of host. Its high efficiency DC/DC converters and low quiescent current in stand-by mode make it particularly suited to low power and portable applications.| Part No. | AT83C26 |
|---|---|
| Datasheet | AT83C26 Download |
| Manufacturer |  Atmel |
| Description | Multiple Smart Card Reader Interface |
| Buy | Stock & Price |
FEATURES
● 5 Smart Card Interfaces – Compliance with ISO 7816, EMV2000, GIE-CB and GSM Standards – Direct Connection to the Smart Cards Logic Level Shifters Short Circuit Current Limitation 4kV+ ESD Protection (MIL/STD 883 Class 3) – 1 or 2 Master Smart Card interfaces Synchronous Card support (with C4 and C8 Contacts) Card Detection and Automatic de-activation sequence on card extraction – 1 to 4 SAM/SIM cards (15 to 30mA each) – Programmable Voltage for each smart card Class A: 5V ±0.4V at 60 mA (±0.25V at 65 mA with VCC= 5V±10%) Class B: 3V ±0.2V at 60 mA Class C: 1.8V ±0.14V at 40mA – Low Ripple Noise: < 200 mV – Programmable Activation Sequence – Automatic de-activation on card power-fail or over-current and system power-fail – Card Clock Stop High or Low for Card Power-down Modes● Versatile Host Interface – Two Wire Interface (TWI) Link at 400kbit/s Programmable Address allow up to 4 AT83C26 on the bus – Programmable Interrupt Output
● Reset Output Includes – Power-On Reset (POR...
