Atmel AT83C5134
AT83C5134/35 is pin compatible with AT89C5130A 16Kbytes In-System Programmable Flash microcontrollers. This allows to use AT89C5130A for development, pre-production and flexibility, while using AT83C5134/35 for cost reduction in mass production. This module integrates the USB transceivers and the Serial Interface Engine (SIE) with Digital Phase Locked Loop and 48 MHz clock recovery.| Part No. | AT83C5134 |
|---|---|
| Datasheet | AT83C5134 Download |
| Manufacturer |  Atmel |
| Description | 8-bit Microcontroller |
| Buy | Stock & Price |
FEATURES
● 80C52X2 Core (6 Clocks per Instruction) – Maximum Core Frequency 48 MHz in X1 Mode, 24 MHz in X2 Mode – Dual Data Pointer – Full-duplex Enhanced UART (EUART), TxD and Rxd are 5 Volt Tolerant – Three 16-bit Timer/Counters: T0, T1 and T2 – 256 Bytes of Scratchpad RAM● 8/16/32-Kbyte On-chip ROM
● 512 byte or 32-Kbyte EEPROM(1)
● On-chip Expanded RAM (ERAM): 1024 Bytes
● Integrated Power Monitor (POR/PFD) to Supervise Internal Power Supply
● USB 2.0 Full Speed Compliant Module with Interrupt on Transfer Completion (12Mbps) – Endpoint 0 for Control Transfers: 32-byte FIFO – 6 Programmable Endpoints with In or Out Directions and with Bulk, Interrupt or Isochronous Transfers
● Endpoint 1, 2, 3: 32-byte FIFO
● Endpoint 4, 5: 2 x 64-byte FIFO with Double Buffering (Ping-pong Mode) – Suspend/Resume Interrupts – Power-on Reset and USB Bus Reset – 48 MHz DPLL for Full-speed Bus Operation – USB Bus Disconnection on Microcontroller Request
● 5 Channels Programmable Counter Array (PCA) wi...
