• Part: ATINY13
  • Description: 8-Bit Microcontroller
  • Category: Microcontroller
  • Manufacturer: Atmel
  • Size: 1.90 MB
Download ATINY13 Datasheet PDF
Atmel
ATINY13
ATINY13 is 8-Bit Microcontroller manufactured by Atmel.
- Part of the ATINY13V comparator family.
Features - High Performance, Low Power AVR® 8-Bit Microcontroller - Advanced RISC Architecture - 120 Powerful Instructions - Most Single Clock Cycle Execution - 32 x 8 General Purpose Working Registers - Fully Static Operation - Up to 20 MIPS Througput at 20 MHz High Endurance Non-volatile Memory segments - 1K Bytes of In-System Self-programmable Flash program memory - 64 Bytes EEPROM - 64K Bytes Internal SRAM - Write/Erase cyles: 10,000 Flash/100,000 EEPROM - Data retention: 20 years at 85°C/100 years at 25°C(1) - Optional Boot Code Section with Independent Lock Bits In-System Programming by On-chip Boot Program True Read-While-Write Operation - Programming Lock for Software Security Peripheral Features - One 8-bit Timer/Counter with Prescaler and Two PWM Channels - 4-channel, 10-bit ADC with Internal Voltage Reference - Programmable Watchdog Timer with Separate On-chip Oscillator - On-chip Analog parator Special Microcontroller Features - debug WIRE On-chip Debug System - In-System Programmable via SPI Port - External and Internal Interrupt Sources - Low Power Idle, ADC Noise Reduction, and Power-down Modes - Enhanced Power-on Reset Circuit - Programmable Brown-out Detection Circuit - Internal Calibrated Oscillator I/O and Packages - 8-pin PDIP/SOIC: Six Programmable I/O Lines - 20-pad MLF: Six Programmable I/O Lines Operating Voltage: - 1.8 - 5.5V for ATtiny13V - 2.7 - 5.5V for ATtiny13 Speed Grade - ATtiny13V: 0 - 4 MHz @ 1.8 - 5.5V, 0 - 10 MHz @ 2.7 - 5.5V - ATtiny13: 0 - 10 MHz @ 2.7 - 5.5V,...