Datasheet4U Logo Datasheet4U.com

ATTINY13A - 8-bit Microcontroller

General Description

VCC Supply voltage.

GND Ground.

Port B (PB5:PB0) Port B is a 6-bit bi-directional I/O port with internal pull-up resistors (selected for each bit).

Key Features

  • High Performance, Low Power AVR® 8-Bit Microcontroller.
  • Advanced RISC Architecture.
  • 120 Powerful Instructions.
  • Most Single Clock Cycle Execution.
  • 32 x 8 General Purpose Working Registers.
  • Fully Static Operation.
  • Up to 20 MIPS Througput at 20 MHz High Endurance Non-volatile Memory segments.
  • 1K Bytes of In-System Self-programmable Flash program memory.
  • 64 Bytes EEPROM.
  • 64 Bytes Internal SRAM.
  • Write/.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ATtiny13A CMOS 8-bit microcontroller Microchip
ATtiny10 CMOS 8-bit microcontroller Microchip
ATtiny15 8-bit Microcontroller ATMEL Corporation
ATTINY15L 8-bit Microcontroller ATMEL Corporation
ATtiny1607 Microcontroller Microchip

Other Datasheets by Atmel (now Microchip Technology)

Part Number Description
ATtiny13 8-bit Microcontroller
ATtiny13V 8-bit Microcontroller
ATtiny10 8-bit AVR Microcontroller
ATtiny102 8-bit AVR Microcontroller
ATtiny104 8-bit AVR Microcontroller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Features • High Performance, Low Power AVR® 8-Bit Microcontroller • Advanced RISC Architecture – 120 Powerful Instructions – Most Single Clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 20 MIPS Througput at 20 MHz High Endurance Non-volatile Memory segments – 1K Bytes of In-System Self-programmable Flash program memory – 64 Bytes EEPROM – 64 Bytes Internal SRAM – Write/Erase Cycles: 10,000 Flash/100,000 EEPROM – Data retention: 20 Years at 85°C/100 Years at 25°C (see page 6) – Programming Lock for Self-Programming Flash & EEPROM Data Security Peripheral Features – One 8-bit Timer/Counter with Prescaler and Two PWM Channels – 4-channel, 10-bit ADC with Internal Voltage Reference – Programmable Watchdog Timer with Separate On-chip Oscillator –