Atmel TS68C429A
The TS68C429A is an ARINC 429 controller. It is an enhanced version of the EF 4442 and it is designed to be connected to the new 16- or 32-bit microprocessors, especially these of the Atmel TS68K family. 2120A–HIREL–08/02 1 Hardware Overview The TS68C429A is a high performance ARINC 429 controller designed to interface primary to the Atmel TS68K family microprocessor in a straight forward fashion (see “Application Notes” on page 33).FEATURES
●●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
● 8 Independent Receivers (Rx) 3 Independent Transmitters (Tx) Full TS68K Family Microprocessor Interface Compatibility 16-bit Data-bus ARINC 429 Interface: “1” and “0” Lines, RZ Code Support all ARINC 429 Data Rate Transfer and up to 2.5 Mbit/s Multi Label Capability Parity Control: Odd, Even, No Parity, Interrupt Capability Independent Programmable Frequency for Rx and Tx Channels 8 Messages FIFO per Tx Channel Independent Interrupt Request Line for Rx and Tx Functions Vectored Interrupts Daisy Chain Capability Direct Addressing of all Registers Test Modes Capability 20 MHz Operating Frequency Self-test Capability for Receiver Label Memories and Transmit FiFO Low Power: 400 mW
DESCRIPTION
The TS68C429A is an ARINC 429 controller. CMOS ARINC 429 Multichannel Receiver/ Transmitter (MRT) TS68C429A Screening●
●
● MIL-STD-883, class B DESC Drawing 5962-955180 Atmel Standards Application Note
● A detailed application note is available “AN 68C429A” on request.