ACMD-7610 Datasheet | Avago Technologies

Description The Avago ACMD-7610 is a highly miniaturized duplexer designed for use in UMTS Band 8 (880 - 915 MHz UL, 925 - 960 MHz DL) handsets and mobile data terminals. Low Insertion Loss in the Tx channel minimizes current drain from the power amplifier, while low Rx channel Insertion Loss improves receiver sensitivity. The ACMD-7610 enhances the sensitivity and dynamic range of handset receivers by providing high isolation of the transmitted signal from the receiver input and high rejection of transmit-generated noise in the receive band. The ACMD-7610 is designed with Avago Technologies’ innovative Film Bulk Acoustic Resonator (FBAR) technology, which makes possible ultra-small, high-Q filters at a fraction of their usual size. The excellent power handling capability of FBAR bulk-mode resonators supports the high output power levels used in mobile munications applications, while adding virtually no distortion. The ACMD-7610 also utilizes Avago Technologies’ advanced Microcap bonded-wafer, chip scale packaging technology. This process allows the filters to be assembled into a molded chip-on-board module with an overall maximum size of 2.0 x 2.5 mm and maximum height of 0.95 mm. The ACMD-7610 is patible with standard 2.0 x 2.5 mm duplexer PCB footprints. Functional Block Diagram Features x Miniature Size - 2.0 x 2.5 mm Max size - 0.95 mm Max Height - Standard 2 x 2.5 mm PCB footprint x High Isolation enables elimination of interstage filter x Co-banding allows elimination of the GSM Rx filter x High Power Rating - 31 d Bm Abs Max Tx Power x Environmental - Ro HS pliant - Halogen free - TBBPA Free Specifications x Rx Band Performance, -20 to +85° C - Insertion Loss: 3.0 d B Max - Rx Noise Blocking: 50 d B Min x Tx Band Performance, -20 to +85° C - Insertion Loss: 2.7 d B Max - Tx Interferer Blocking: 55 d B Min Applications UMTS Handsets or data terminals operating in Band 8 frequency range. Ant Port 3 Rx Port 2 Tx Port 1 ACMD-7610 Electrical Specifications [2],...