Avago Technologies HCNW135
The 6N135, HCPL-0500, and HCNW135 are for use in TTL/ CMOS, TTL/LSTTL or wide bandwidth analog applications. The 6N136, HCPL-2502, HCPL-0501, and HCNW136 are designed for high speed TTL/TTL applications.| Part No. | HCNW135 |
|---|---|
| Datasheet | HCNW135 Download |
| Manufacturer |  Avago Technologies |
| Description | High Speed Optocouplers |
| Buy | Stock & Price |
DESCRIPTION
These diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance. These single channel optocouplers are available in 8-Pin DIP, SO-8 and Widebody package configurations. Current transfer ratio (CTR) for these devices is 7% minimum at IF = 16 mA. A standard 16 mA TTL sink current through the input LED will provide enough output current for 1 TTL load and a 5.6 kΩ pull-up resistor. CTR for these devices is 19% minimum at IF = 16 mA. Functional Diagram NC 1 ANODE 2 CATHODE 3 NC 4 8 VCC 7 VB 6 VO 5 GND TRUTH TABLE (POSITIVE LOGIC) LED VO ON LOW OFF HIGHFEATURES
● High speed: 1 Mb/s● TTL compatible
● Available in 8-Pin DIP, SO-8, widebody packages
● Open collector...
