Datasheet4U Logo Datasheet4U.com

HCPL-2200 - Low Input Current Logic Gate Optocouplers

General Description

The HCPL-2200/2219 are optically coupled logic gates that combine a GaAsP LED and an integrated high gain photo detector.

The detector has a three state output stage and has a detector threshold with hysteresis.

Key Features

  • 2.5 kV/µs minimum Common Mode Rejection (CMR) at VCM = 400 V (HCPL-2219).
  • Compatible with LSTTL, TTL, and CMOS logic.
  • Wide VCC range (4.5 to 20 V).
  • 2.5 Mbd guaranteed over temperature.
  • Low input current (1.6 mA).
  • Three state output (no pullup resistor required).
  • Guaranteed performance from 0°C to 85°C.
  • Hysteresis.
  • Safety approval.
  • UL recognized -3750 V rms for 1 minute.
  • CSA approved.
  • IEC/.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HCPL-2201 Very High CMR / Wide VCC Logic Gate Optocouplers Hewlett-Packard
HCPL-2202 Very High CMR / Wide VCC Logic Gate Optocouplers Hewlett-Packard
HCPL-2211 Very High CMR / Wide VCC Logic Gate Optocouplers Hewlett-Packard
HCPL-2212 Very High CMR / Wide VCC Logic Gate Optocouplers Hewlett-Packard
HCPL-2231 Very High CMR / Wide VCC Logic Gate Optocouplers Hewlett-Packard

Other Datasheets by Avago Technologies (now Broadcom)

Part Number Description
HCPL-2201 Logic Gate Optocouplers
HCPL-2202 Logic Gate Optocouplers
HCPL-2211 Logic Gate Optocouplers
HCPL-2212 Logic Gate Optocouplers
HCPL-2219 Low Input Current Logic Gate Optocouplers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HCPL-2200, HCPL-2219 Low Input Current Logic Gate Optocouplers Data Sheet Description The HCPL-2200/2219 are optically coupled logic gates that combine a GaAsP LED and an integrated high gain photo detector. The detector has a three state output stage and has a detector threshold with hysteresis. The three state output eliminates the need for a pullup resistor and allows for direct drive of data busses. The hysteresis provides differential mode noise immunity and eliminates the potential for output signal chatter. Asuperiorinternalshieldon theHCPL-2219guarantees common mode transient immunity of 2.5 kV/µs at a common mode voltage of 400 volts. The Electrical and Switching Characteristics of the HCPL-2200/2219 are guaranteed over the temperature range of 0° C to 85° C and a VCC range of 4.