Datasheet4U Logo Datasheet4U.com

HCPL-2612 - High CMR Line Receiver Optocouplers

Download the HCPL-2612 datasheet PDF. This datasheet also covers the HCPL-2602 variant, as both devices belong to the same high cmr line receiver optocouplers family and are provided as variant models within a single manufacturer datasheet.

General Description

The HCPL-2602/12 are optically coupled line receivers that combine a GaAsP light emitting diode, an input current regulator and an integrated high gain photo detector.

The input regulator serves as a line termination for line receiver applications.

Key Features

  • 1000 V/µs minimum Common Mode Rejection (CMR) at VCM = 50 V for HCPL-2602 and 3.5 kV/µs minimum CMR at VCM = 300 V for HCPL-2612.
  • Line termination included.
  • no extra circuitry required.
  • Accepts a broad range of drive conditions.
  • LED protection minimizes LED efficiency degradation.
  • High speed: 10 MBd (limited by transmission line in many.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (HCPL-2602-Avago.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
HCPL-2612 High CMR Line Receiver Optocouplers HP
HCPL-2611 High Speed TTL Compatible Optocouplers HP
HCPL-2611 HIGH SPEED-10 MBit/s LOGIC GATE OPTOCOUPLERS Fairchild Semiconductor
HCPL-2611 High Speed TTL Compatible Optocouplers Broadcom
HCPL-261A Optocouplers HP

Other Datasheets by Avago Technologies (now Broadcom)

Part Number Description
HCPL-2611 High Speed TTL Compatible Optocouplers
HCPL-261A Optocouplers
HCPL-261N Optocouplers
HCPL-2601 High Speed TTL Compatible Optocouplers
HCPL-2602 High CMR Line Receiver Optocouplers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HCPL-2602/2612 High CMR Line Receiver Optocouplers Data Sheet Description The HCPL-2602/12 are optically coupled line receivers that combine a GaAsP light emitting diode, an input current regulator and an integrated high gain photo detector. The input regulator serves as a line termination for line receiver applications. It clamps the line voltage and regulates the LED current so line reflections do not interfere with circuit performance. The regulator allows a typical LED current of 8.5 mA before it starts to shunt excess current. The output of the detector IC is an open collector Schottky clamped transistor. An enable input gates the detector.