Avago Technologies HCPL-J456
the HCPL-J456 and the HCNW4506 con tain an AlGaAs LED. The LED is optically coupled to an inte grated high gain photo detector. Hermetic* HCPL-5300 HCPL-5301 — Ordering Information HCPL-0466, HCPL-4506 and HCPL-J456 are UL Recognized with 3750 Vrms for 1 minute per UL1577.| Part No. | HCPL-J456 |
|---|---|
| Datasheet | HCPL-J456 Download |
| Manufacturer |  Avago Technologies |
| Description | Intelligent Power Module and Gate Drive Interface Optocouplers |
| Buy | Stock & Price |
DESCRIPTION
The HCPL-4506 and HCPL-0466 contain a GaAsP LED while the HCPL-J456 and the HCNW4506 contain an AlGaAs LED. The LED is optically coupled to an integrated high gain photo detector. Minimized propagation delay difference between devices makes these optocouplers excellent solutions for improving inverter efficiency through reduced switching dead time. An on chip 20 kΩ output pull-up resistor can be enabled by shorting output pins 6 and 7, thus eliminating the need for an external pull-up resistor in common IPM applications. Specifications and performance plots are given for typical IPM applications. Functional Diagram NC 1 ANODE 2 20 kΩ 8 VCC 7 VL CATHODE 3 6 VO NC 4 SHIELD 5 GNDFEATURES
● Performance specified for bommon IPM applications over industrial temperature range: -40°C to 100°C● Fast maximum propagation delays tPHL = 480 ns tPLH = 550 ns
● Minimized Pulse Width Distortion PWD = 450 ns
● 15 kV/µs minimum common mode transient immunity at VCM = 1500 V
● CTR > 44% a...
