SFH757 Datasheet | Avago Technologies

Description The SFH757 is a low-cost transmitter diode for optical data transmission with polymer optical fiber. Its In Ga Al P LED chip provides enhanced resistance to humidity and is designed to emit light at 650 nm. The robust SFH757 can be used for speeds up to 100 MBd and plements the Avago SFH250 photodiode receiver and SFH551/1-1 integrated photo detector receiver. The SFH series is optimized for easy coupling. No fiber stripping is required; just insert the cut fiber into the selected SFH ponent. The transparent plastic package has an aperture where a 2.2 mm fiber end can be inserted. This very easy coupling method is extremely cost-effective. SFH757V The V-housing allows easy coupling of unconnectorized 2.2 mm polymer optical fiber with an axial locking screw. Ordering Information Features - High speed transmitter for up to 100MBd applications (with peaking circuits) - 2.2mm aperture holds standard 980/1000/2200µm plastic fibers - No fiber stripping required - Molded microlens for efficient coupling Plastic Direct Fiber Connector housing (V-housing) - Locking screw attached to the connector - Interference-free transmission by the light-tight housing - Transmitter and receiver can be positioned flexibly - No cross talk - Auto insertable and wave solderable - Supplied in tubes Applications - Household electronics - Power electronics - Optical networks - Light barriers Type SFH757 SFH757V Ordering Code SP000063871 SP000063858 SFH757V Application Literature AN # 5342 Description General information about the SFH series with Selection Guide and remendations regarding System Planning and Mounting Information about Basic and Special Circuits for Transmitter and Receiver of the SFH series 0.5 0.6 ∅ 4.625 ∅ 2.275 2.54 Package Dimensions  SFH757 1.5 28 Dimensions in mm SFH757V 24.0 13.5 surface not...